Uploading Routes to the GPS Device

From FloristWiki

Revision as of 09:07, 9 May 2008 by MercTechUWriter (Talk | contribs)
Jump to: navigation, search

IMPORTANT: The GPS device can only store routes for a single driver at a time. If you attempt to upload routes for a second driver to the same GPS device, routes for the first driver will be removed automatically from the GPS device. Additionally, you must upload from the same computer where you created the delivery routes.

  1. Create your delivery routes as normal in Mercury Delivery. Ensure you finish by clicking Complete Routes.
  2. Plug the GPS device into your computer’s USB port.
  3. Click the GPS Device button on the toolbar. The PoiLoader window opens.
  4. On the Welcome panel, click Next.
  5. On the Device Search panel, if the Garmin StreetPilot c330, StreetPilot c340, or Nuvi 350 GPS

device is not automatically found, click Find Device. Once the device has been found, click Next.

  1. Select Install new custom POI’s onto your device and click Next.
  2. On the Data Selection panel:
    1. Click Browse and browse to C:\Wings\GPSdata and select the folder with the name of the driver for whom you want to upload routes. Click OK.
    2. Ensure your units are set appropriately.
    3. Select Express (Recommended) as the mode.
    4. Click Next.
  3. On the Finish screen click Finish.

Your Garmin GPS unit will reset after it has loaded.

Back to GPS Integration

Personal tools